Blog - Zahi Tech

Sean Bell Sean Bell

0 Course Enrolled • 0 Course Completed

Biography

Quiz 2025 Fortinet High Pass-Rate NSE7_SDW-7.2 Certification Questions

2025 Latest Braindumpsqa NSE7_SDW-7.2 PDF Dumps and NSE7_SDW-7.2 Exam Engine Free Share: https://drive.google.com/open?id=1zG4eU872d8GRP2ZEAPl6iI3J-buaflMN

Do you upset about the difficulty of Fortinet practice questions? Do you disappointed at losing exam after long-time preparation? We can help you from these troubles with our Latest NSE7_SDW-7.2 Learning Materials and test answers. You will find valid NSE7_SDW-7.2 real questions and detailed explanations in Braindumpsqa, which ensure you clear exam easily.

Fortinet NSE7_SDW-7.2 Exam Syllabus Topics:

Topic
Details

Topic 1

SD-WAN Overlay Design and Best Practices: It focuses on the deployment of hub-and-spoke IPsec topologies and configuring ADVPN. Proficiency in this topic ensures that Fortinet network and security professionals can implement effective and reliable SD-WAN overlays tailored to organizational needs.

Topic 2

Centralized Management: This area focuses on deploying and managing SD-WAN through FortiManager, including using IPsec templates and SD-WAN Overlay Templates. Mastery here demonstrates the abilities of Fortinet network and security professionals to streamline SD-WAN configuration, enhance security, and maintain consistent policies across multiple sites.

Topic 3

SD-WAN Troubleshooting: Troubleshooting SD-WAN issues, including rules, routing, and ADVPN, is vital for maintaining network reliability. This section of the Fortinet NSE 7 - SD-WAN 7.2 exam tests the ability to diagnose and resolve SD-WAN problems using diagnostic commands and monitoring tools, ensuring robust and uninterrupted network operations.

Topic 4

Rules and Routing: Understanding SD-WAN Rules and Routing is crucial for directing traffic effectively. This topic of the NSE7_SDW-7.2 Exam evaluates the capabilities of Fortinet network and security professionals to configure SD-WAN rules and routing.

Topic 5

SD-WAN Configuration: This topic assesses skills of Fortinet network and security professionals in setting up basic SD-WAN environments, including configuring Direct Internet Access (DIA), SD-WAN Members, and Performance Service Level Agreements (SLAs). Proficiency here ensures the ability to design efficient and resilient SD-WAN configurations.

>> NSE7_SDW-7.2 Certification Questions <<

Reliable Fortinet NSE7_SDW-7.2 Certification Questions & The Best Braindumpsqa - Leading Provider in Qualification Exams

As long as you spend less time on the game and spend more time on learning, the NSE7_SDW-7.2 study materials can reduce your pressure so that users can feel relaxed and confident during the preparation and certification process on the NSE7_SDW-7.2 exam. It is believed that many users have heard of the NSE7_SDW-7.2 Latest preparation materials from their respective friends or news stories. Our NSE7_SDW-7.2 exam questions are valid and reliable. So why don't you take this step and try on our NSE7_SDW-7.2 study guide? You will not regret your wise choice.

Fortinet NSE 7 - SD-WAN 7.2 Sample Questions (Q78-Q83):

NEW QUESTION # 78
What are two benefits of choosing packet duplication over FEC for data loss correction on noisy links?
(Choose two.)

A. Packet duplication can leverage multiple IPsec overlays for sending additional data.
B. Packet duplication does not require a route to the destination.
C. Packet duplication supports hardware offloading.
D. Packet duplication uses smaller parity packets which results in less bandwidth consumption.

Answer: A,C

NEW QUESTION # 79
Refer to the exhibit.

FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

A. Use unique Diffie Hellman groups on each VPN interface.
B. Use different proposals are used between the interfaces.
C. Configure the IKE mode to be aggressive mode.
D. Specify a unique peer ID for each dial-up VPN interface.

Answer: C,D

NEW QUESTION # 80
Which two tasks are part of using central VPN management? (Choose two.)

A. FortiManager installs VPN settings on both managed and external gateways.
B. You must enable VPN zones for SD-WAN deployments.
C. You configure VPN communities to define common IPsec settings shared by all VPN gateways.
D. You can configure full mesh, star, and dial-up VPN topologies.

Answer: C,D

NEW QUESTION # 81
Exhibit.

The exhibit shows the output of the command diagnose sys sdwan health-check status collected on a FortiGate device. Which two statements are correct about the health check status on this FortiGate device? (Choose two.)

A. The interface T_INET_1 missed one SLA target.
B. There is no SLA criteria configured for the health-check Level3_DNS.
C. The health-check VPN_PING orders the members according to the lowest jitter.
D. The interface T_INET_0 missed three SLA targets.

Answer: B,C

Explanation:
According to the FortiGate / FortiOS 6.4.2 Administration Guide, the health check status command displays the status of the health check probes for each SD-WAN member interface. The output includes the following information:
state: the current state of the interface, either alive or dead
packet-loss: the percentage of packets lost during the health check
latency: the average round-trip time in milliseconds
jitter: the variation in latency
mos: the mean opinion score, a measure of voice quality
bandwidth: the available bandwidth in kilobits per second for each direction (up, down, bi) sla map: a bitmap that indicates which SLA criteria are met or failed Based on the exhibit, the following statements are correct:
The health-check VPN_PING orders the members according to the lowest jitter. This means that the interface with the lowest jitter value is listed first, followed by the next lowest, and so on1. In the exhibit, the order is T_MPLS, T_INET_1, and T_INET_0.
There is no SLA criteria configured for the health-check Level3_DNS. This means that the health check does not use any SLA parameters to determine the state of the interface2. In the exhibit, the sla map value is 0x0 for both port1 and port2, indicating that no SLA criteria are applied.

NEW QUESTION # 82
Refer to the exhibit.

Based on the exhibit, which action does FortiGate take?

A. FortiGate brings up port5 after it detects all SD-WAN members as alive.
B. FortiGate fails over to the secondary device after it detects all SD-WAN members as dead.
C. FortiGate bounces port5 after it detects all SD-WAN members as dead.
D. FortiGate brings down port5 after it detects all SD-WAN members as dead.

Answer: C

NEW QUESTION # 83
......

As to this fateful exam that can help you or break you in some circumstances, our company made these NSE7_SDW-7.2 practice materials with accountability. We understand you can have more chances being accepted by other places and getting higher salary or acceptance. Our NSE7_SDW-7.2training materials are made by our responsible company which means you can gain many other benefits as well. We offer free demos for your reference, and send you the new updates if our experts make them freely.

Valid NSE7_SDW-7.2 Practice Materials: https://www.braindumpsqa.com/NSE7_SDW-7.2_braindumps.html

P.S. Free 2025 Fortinet NSE7_SDW-7.2 dumps are available on Google Drive shared by Braindumpsqa: https://drive.google.com/open?id=1zG4eU872d8GRP2ZEAPl6iI3J-buaflMN

Sean Bell Sean Bell

Biography

Learning Simplified!

Quick Link

Resources

More Links